How We Prepare to Protect & Paint The Exterior of Your Home.

1. Trench 2" below the ground around the foundation where it meets the earth.
2. Pretreat mold and mildew to kill and eliminate it.
3. Pressure wash the exterior of your home to ensure proper cleaning so the paint will last longer, without chipping or peeling.
4. Mask all windows and cover any fixtures, out door furniture, landscaping, hardscape or any other item to protect them from over spray in the course of painting.
5. Repair and Texture all cracks and voids in stucco surfaces to match existing Texture.
6. Repair, scrape, and patch or sand all wood surfaces with appropriate patching materials and abrasives. If wood in any area is too damaged or rotted then Replacement wood available at an additional cost.
7. Caulk or fill all wood to wood trim and wood to stucco joints with appropriate caulk, spackle or putty as required to span and seam joints of windows and all decorative trim.
8. Apply a Good Quality Primer Coat to all bare wood, stucco and metal surfaces
9. Apply all Paint with airless sprayer on all surfaces except for trim and doors for complete and even coverage.
10. Clean up and remove all masking, coverings and prep work, filling in dirt of the 2” Trench, around house dug earlier. Leaving the job cleaner than we started.

PLUS We then walk around the Exterior to do a final inspection with owner or manager to ensure 100 % quality customer satisfaction.